New Lower Pricing on our new stock!
Our new silicone maxi sized Big Building Bricks Mould has joined our Kids Building Bricks, and this mould makes 6 chunky sized soaps per pour. The "soap bricks" made in this mould are quite a large brick - please note size comparison graphics.
AND this mould makes EXCELLENT jellies for kids parties and summer time fun!
As with all silicone moulds, we recommend placing the mould on a rigid baking sheet when soaping in case you need to move them before they are set up.
Cavities: 6
Individual soap weight: 120 - 140g
Soap Dimensions: 6.5cm x 6.5cm x 4.5cm deep
Material: Flexible Food-grade Silicone* (FDA standard)
Easy Clean: Warm, washing up water (we do not recommend using a dishwasher)
FOOD SAFE - makes great jellies!
Suitable for: Melt & Pour Soap, Jelly Soap. If you wish to use for Cold Process Soap, please use a hard recipe and unmould with caution. If you physically twist the joints they will show signs of this and cause a weak spot
Unsuitable for: Bath Bombs and Fizzies
Temperature -10 - 230°C
Mould Colour: Green.
*Once used for soap the mould is no longer food-suitable
**Dimensions are approximate
If using Cold Process Soap, we recommend either a 15% water discount, or a hard recipe and adding 1 tsp Sodium Lactate per 500g of soap to your recipe for easier unmoulding. Leave Cold Process Soap in the mould a week or more as it can be tricky to unmould CP Soap due to the 4 little round parts on the top of the soap.
See this page for usage and care instructions for this mould
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS ITS SHAPE AND DURABILITY
Cavities: | 6 |
Individual Bar Weight: | 120 - 140g |
Temperature: | -10 - 230°C |
Manufacturer: | Aussie Soap Supplies |
Mould Material: | Flexible Food-grade Silicone* (FDA standard) |
Mould Colour: | Green |
Individual Bar Dimensions: | 6.5cm x 6.5cm x 4.5cm |
Overall Capacity: | 850g |
Overall Mould Dimensions: | 23 x 16 x 4.8cm |
Suitable For: | Food Jellies! Melt & Pour Soap, Cold Process Soap, Jelly Soap. If you wish to use for Cold Process Soap, please use a hard recipe and unmould with caution. If you physically twist the joints they will show signs of this and cause a weak spot. |