This silicone mould makes one butterfly shaped 75g guest soap per pour, the design is as pictured. If you prefer smaller guest bars, simply half fill the mould.
Notes: The base of the wings has a lower profile to the head end, please refer to graphics.
Individual soap weight: 75g
Soap Dimensions: 8.2 cm x 6.5cm x 3.2cm deep
Material: Flexible Food-grade Silicone* (FDA standard)
Easy Clean: Warm, washing up water (we do not recommend using a dishwasher)
Suitable for: Melt and Pour Soap, Bath and Massage Bars
Not yet tested for: Cold Processed Soap, Massage & Bath Melts
Unsuitable for: Bath Bombs and Fizzies (sides are not rigid enough), not for novice CP'ers
Temperature -10 - 230°C
Mould Colour: This mould is supplied in several colours, and is randomly picked so may vary from the colours shown in graphics.
*Once used for soap the mould is no longer food-suitable
**Dimensions give are approximate
If using Cold Process Soap, we recommend either a 15% water discount, or adding 1 tsp Sodium Lactate per 500g of soap to your recipe for easier unmoulding. The narrow wing tips and antenna make this mould quite difficult to unmould for Cold Process Soap. A lengthy cure in the mould and a freezer may be required!
See this page for usage and care instructions for this mould
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS ITS SHAPE AND DURABILITY
|Individual Bar Weight:||75g|
|Temperature:||-10 - 210°C|
|Manufacturer:||Aussie Soap Supplies|
|Mould Material:||Flexible Food-grade Silicone* (FDA standard)|
|Mould Colour:||Rainbow assorted, picked randomly|
|Not Yet Tested For:||Cold Process Soap - not for novice CP'ers|
|Individual Bar Dimensions:||8.2 cm x 6.5cm x 3.2cm deep|
|Overall Mould Dimensions:||N/A|
|Suitable For:||Melt & Pour Soap, Soy Tarts, Massage Melts|