These economical, light weight silicone moulds make 4 deep oval soap bars per pour. You can half fill the mould cavities to make smaller bars of regular thickness.
As with all silicone moulds, we recommend placing the moulds on a rigid baking sheet when soaping in case you need to move them before they are set up.
Individual soap weight: 110g poured to brim
Soap Cavity Dimensions**: 8.4cm x 5.8cm x 2.5cm deep
Material: Flexible Food-grade Silicone* (FDA standard)
Easy Clean: Warm, washing up water (we do not recommend using a dishwasher)
Suitable for: Melt and Pour Soap and Cold Processed Soap, Massage & Bath Melts
Unsuitable for: Bath Bombs and Fizzies (sides are not rigid enough)
Temperature -10 - 230°C
Mould Colour: Green or Purple
*Once used for soap the mould is no longer food-suitable
**Dimensions given are approximate
If using cold process soap, we recommend either a 15% water discount, or adding 1 tsp Sodium Lactate per 500g of soap to your recipe for easier unmoulding.
See this page for usage and care instructions for this mould
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS IT'S SHAPE AND DURABILITY
|Individual Bar Weight:||110g|
|Temperature:||-10 - 230°C|
|Manufacturer:||Aussie Soap Supplies|
|Mould Material:||Flexible Food-grade Silicone* (FDA standard)|
|Not Yet Tested For:||Bath Bombs and Fizzies|
|Individual Bar Dimensions:||8.4cm x 5.8cm x 2.5cm deep|
|Suitable For:||Melt and Pour Soap and Cold Processed Soap, Massage Bars, Bath Melts|