Budget-Wise Flex Mould - Daisy (Single)

$2.90

SKU: SIL240

NEW

This silicone mould makes one daisy shaped 100 - 140g soap per pour, the design is as pictured which was poured to two thirds full so that the so weighs in at 100g.  If you prefer smaller or guest bars, simply half fill the mould. 

There is a beginner project using these Daisy Moulds here

Cavities: 1
Individual soap weight:  140g
Soap Dimensions:  8.2 cm x 6.5cm x 3.2cm deep
Material:  Flexible Food-grade Silicone*  (FDA standard)
Easy Clean:  Warm, washing up water (we do not recommend using a dishwasher)
Suitable for:  Melt and Pour Soap, Bath and Massage Bars
Not yet tested for:  Cold Processed Soap, Massage & Bath Melts
Unsuitable for:  Bath Bombs and Fizzies (sides are not rigid enough)
Temperature -10 - 230°C
Mould Colour:  This mould is supplied in several colours, and is randomly picked so may vary from the colours shown in graphics.
*Once used for soap the mould is no longer food-suitable
**Dimensions give are approximate

If using Cold Process Soap, we recommend either a 15% water discount, or adding 1 tsp Sodium Lactate per 500g of soap to your recipe for easier unmoulding.  The narrow wing tips and antenna make this mould quite difficult to unmould for Cold Process Soap.  A lengthy cure in the mould and a freezer may be required!

See this page for usage and care instructions for this mould

HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS ITS SHAPE AND DURABILITY

Cavities: 1
Individual Bar Weight: 100 - 140g
Temperature: -10 - 210°C
Manufacturer: Aussie Soap Supplies
Mould Material: Flexible Food-grade Silicone* (FDA standard)
Mould Colour: Rainbow assorted, picked randomly
Not Yet Tested For: Cold Process Soap - not for novice CP'ers
Individual Bar Dimensions: cm x cm x cm deep
Overall Capacity: 130g
Overall Mould Dimensions: N/A
Suitable For: Melt & Pour Soap, Soy Tarts, Massage Melts