This silicone mould makes one 3D soap per pour, the design is as pictured, cute as a button! This mould can also be used for confectionery and cake decorating prior to using for soap.
Individual soap weight: 35g
Actual Soap Dimensions** (approx): 6.7cm x 4.2cm x 4.2cm deep
External Mould Dimensions**: 8.6cm x 4.4cm x 6.2cm
Material: Flexible Food-grade Silicone* (FDA standard)
Easy Clean: Warm, washing up water (we do not recommend using a dishwasher)
Suitable for: Melt and Pour Soap and Cold Processed Soap
Unsuitable for: Bath Bombs and Fizzies
Temperature -10 - 230°C
Mould Colour: This mould is supplied in several colours, and is randomly picked so may vary from the colours shown in graphics.
*Once used for soap the mould is no longer food-suitable
**Dimensions given are approximate
If using cold process soap, we recommend either a 15% water discount, or adding 1 tsp Sodium Lactate per lb of soap to your recipe for easy unmolding.
See this page for usage and care instructions for this mould
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS IT'S SHAPE AND DURABILITY
|Individual Bar Weight:||35g|
|Temperature:||-10 - 230°C|
|Manufacturer:||Aussie Soap Supplies|
|Mould Material:||Flexible Food-grade Silicone* (FDA standard)|
|Mould Colour:||Usually pink|
|Not Yet Tested For:||Cold Process Soap - not for novice CP'ers|
|Individual Bar Dimensions:||6.7cm x 4.2cm x 4.2cm deep|
|Overall Mould Dimensions:||8.6cm x 4.4cm x 6.2cm|
|Suitable For:||Melt and Pour Soap and Cold Processed Soap - CP needs to have a high percentage of hard butters/oils for easier removal. We also recommend adding Sodium Lactate.|