This silicone mould makes six swirled teardrop shaped soaps or candles per pour. Because the mould is silicone, it's easy to use and even easier to clean.
When inverted to fill the mould, the moulded 'feet' supports the base of the moulds. It works well for cold process soap, melt and pour soap, lotion bars, and more.
For candles, make a small hole in the base for the wick, so that it fits snugly to avoid any leakage.
Cavities: 6
Individual soap weight: 125g
Soap Dimensions: 6.5m x 6.7cm x 6cm depth
Easy Clean: Warm, washing up water (we do not recommend using a dishwasher)
Suitable for: Melt and Pour Soap and Cold Processed Soap, hard Massage Bars, Candles
For Candles: Mould does not have a wick hole already. Use a skewer or similar to make a hole for the wick in apex of the mould.
Not Tested for: Bath Bombs we recommend for crafters with some experience - see instructions below
Temperature -10 - 230°C
Manufacturer: Aussie Soap Supplies
Mould Colour: White
**Dimensions given are approximate
Bath Bombs: If trialling we recommend mixing some Coconut Oil with witch hazel into the mix to assist unmould. We would also recommend a quick spritz of the the mould with a mix of Fractionated Coconut Oil and Witch Hazel.
If using cold process soap, we recommend either a 15% water discount, or adding 1 tsp Sodium Lactate per 500g of soap to your recipe for easier unmoulding.
See this page for usage and care instructions for this mould
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS IT'S SHAPE AND DURABILITY
| Cavities: | 6 |
| Individual Bar Weight: | 125g |
| Temperature: | -10 - 230°C |
| Manufacturer: | Aussie Soap Supplies |
| Mould Material: | Flexible Food-grade Silicone* (FDA standard) |
| Mould Colour: | White |
| Individual Bar Dimensions: | 6.5cm x 6.7cm x 6cm depth approximately |
| Overall Capacity: | Approximately 750g |
| Suitable For: | Melt and Pour Soap and Cold Processed Soap, Lotion Bars, hard Massage Bars, Candles |