Flexible Column Embed Mould - Heart




This innovative 2-piece silicone column mould makes a mini heart shaped log that is amazingly easy to unmould. No more pushing until it feels like your fingers will break!

This mould is great for making embed soap shapes for use in our silicone loaf mould or cutting the log into pieces to decorate the tops of soap.  This  heart shape can create a variety of other shapes including leaves and mosaic designs.  Due to the length of our mini mould, extra support is needed for the mould to remain upright.  We recommend using our heavy duty column mould or simply a tall glass to support the mold until your soap has hardened.  The interlocking seal is easy to use, no clamps or bands are needed.  And of course, since it is made of silicone, this mould makes it extremely easy to release your soap and wash. 

As with most silicone moulds, your Cold Processed Soap may need an extra day or two to fully harden since the flexible silicone sides do not allow air inside the mould, which results in slower evaporation of water and hardening of your soap.  The inclusion of Sodium Lactate Plus is recommended for a nice shiny finish and easier mould release.

Suitable for both Cold Process Soap and Melt and Pour Soap.  I like to pour a couple of embed moulds when I make a Cold Process Soap batch so they are ready for embedding next soaping session.  Melt and Pour Soap sets up quite quickly in these moulds and is ready to use after a couple of hours.

Please Note: To avoid any leaking make sure the interlocking seal is fully pressed together around the entire edge of the mould.  We recommend hand washing your mould after use.

Cavities:  1
Soap weight:  135g
Size:  approximately 2.2cm diameter x 30 cm long

Click here to watch SQ Silicone Two Piece Mould Usage Video or watch the video below


And this is an Advanced SQ project using those hearts!

Cavities: 1
Individual Bar Weight: Cut to preferred size
Temperature: -10 - 230°C
Manufacturer: Aussie Soap Supplies
Mould Material: Silicone
Mould Colour: Natural/Clear
Overall Capacity: 135g
Overall Mould Dimensions: 2.2cm diameter x 30 cm long
Suitable For: Cold Processed and Melt & Pour Soap