Flexible Silicone Embed Mould. This silicone mould makes 6 tiny embed or guest soap Stegasaurus (Stegasaurii?) per pour.
Cavities: 6
Individual soap weight: 5 - 10g
Soap Dimensions**: 47mm x 27mm x 14mm deep
Material: Flexible Food-grade Silicone* (FDA standard)
Easy Clean: Warm, washing up water (we do not recommend using a dishwasher)
Suitable for: Melt and Pour Soap, Massage & Bath Melts, large Soy Tarts. Hard Cold Processed Soap embeds - you will need freezer to unmould these.
Not tested for: Bath Bombs and Fizzies
Temperature -10 - 230°C
Colour: Cream
*Once used for soap the mould is no longer food-suitable
**Sizes are approximate
If using cold process soap, we recommend either a 15% water discount, or adding 1 tsp Sodium Lactate per 500g of soap to your recipe for easier unmoulding. Due to the intricacy of detail you may need to freeze for unmoulding.
See this page for usage and care instructions for this mould
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS IT'S SHAPE AND DURABILITY
Cavities: | 6 |
Individual Bar Weight: | 5 - 10g |
Temperature: | -10 - 230°C |
Manufacturer: | Aussie Soap Supplies |
Mould Material: | Flexible Food-grade Silicone* (FDA standard) |
Mould Colour: | Cream |
Not Yet Tested For: | Bath Bombs and Fizzies |
Individual Bar Dimensions: | 47mm x 27mm x 14mm deep |
Overall Mould Dimensions: | 18.5cm x 9cm |
Suitable For: | Melt and Pour Soap and hard Cold Processed Soap embeds. You will need freezer to unmould CP. |