Flexible Mould - Loaf TALL




Yes!  Skinny, tall and silicone - perfect!   30cm Tall Loaf - Flexible Silicone Platinum Mould.

The flexibility of silicone makes unmoulding "the loaf" so much easier!  The inside of this mould has a high gloss finish giving your soap will have that smooth, professional finish.  The sides are re-inforced externally to help prevent bowing, so that your finished soap should be straight, however, see TIP 2 below to ensure this is the case.

This mould is so versatile as you can see from the graphics, and if layering you can just see the levels through the sides in case you need to check embeds (not crystal clear tho!)

Tip 1:  If making Cold Process soap in this (or any) silicone mould we recommend adding Sodium Lactate Plus to your recipe.  This will help to harden up your soap so that there won't be any dents or finger marks from unmoulding the soap.  We find that Cold Processed Soap is better left in this type of silicone mould for 48 hours before unmoulding.

Tip 2:  This mould may bow a little if filled all the way to the brim.  In our tests, if you fill to 1 to 1.5cm from the top made unmoulding easier, and also didn't bow the sides.  If you really need that extra height, we use two blocks of MP Soap (or you can use house bricks or books wrapped in towels too!) to hold the mould firmly to take that extra bit of height.

Cavities: 1
Soap weight:  approximately 1.3kg
Internal mould size:  30cm Long  x 5.3cm Wide x 8.2cm Tall/High
This silicone soap mould is safe up to 230°C, 440°F

You can see Soap Queen Tutorials using this Mould:

Blue Rain Drop Swirl Cold Process Soap Project and this gorgoeous Once Upon a Dream Cold Process Project  also this Dragon's Breath Cold Process Projectd from Soap Queen can be made in this mould as well as the tall wooden one

and here for a Melt and Pour project which we love, and are planning on making in several colour styles now the moulds have arrived!

See this page for usage and care instructions for this mould


Cavities: 1
Individual Bar Weight: Cut to preferred size
Temperature: -10 - 230°C
Manufacturer: Aussie Soap Supplies
Mould Material: Flexible Silicone
Mould Colour: Natural
Individual Bar Dimensions: Cut to preferred size
Overall Capacity: 1.3kg
Overall Mould Dimensions: 30cm Long x 5.3cm Wide x 8.2cm Tall/High
Suitable For: Melt and Pour Soap and Cold Processed Soap