Create 4 beautiful soaps in this easy to use silicone mould. This design lends itself to a variety of sized bars; a shallow pour creates slim guest soap bars or full to the rim of the mould creates a lovely, deeper bar.
This mould is perfect for 900ml sized batches, and if you are embedding or layering you can just see the levels through the sides in case you need to check embeds (it's not crystal clear though!)
Soap Cavity Dimensions**: 8cm x 6.5cm x 2.5 - 3cm deep
Individual soap weight: 130g
Material: Flexible Silicone
Easy Clean: Warm, washing up water (we do not recommend using a dishwasher)
Suitable for: Melt and Pour Soap and Cold Processed Soap
Temperature - up to 230°C
Mould Colour: Natural or purple
**Dimensions given are approximate
Tip: If making Cold Process soap in this (or any) silicone mould we recommend adding Sodium Lactate Plus to your recipe. This will help to harden up your soap so that there won't be any dents or finger marks from unmoulding the soap. We find that Cold Processed Soap is better left in this type of silicone mould for 72 hours before unmoulding. Take care when unmoulding to keep the perfect detailing.
See this page for usage and care instructions for this mould
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS IT'S SHAPE AND DURABILITY
Tip: If making Cold Process Soap in this (or any) silicone mould we recommend either a 15% water discount, or adding Sodium Lactate Plus; 1 tsp Sodium Lactate per 500g of soap to your recipe for easier unmoulding. We find that Cold Processed Soap is better left in this type of silicone mould for at least 48 hours before unmoulding.
|Individual Bar Weight:||60g to 135g depending on depth|
|Temperature:||-10 - 230°C|
|Manufacturer:||Aussie Soap Supplies|
|Mould Material:||Flexible Food-grade Silicone* (FDA standard)|
|Individual Bar Dimensions:||8cm x 6.5cm x 2.5 - 3cm|
|Suitable For:||Melt and Pour Soap and Cold Processed Soap|