Flexible Silicone Tray Mould.
This is an authentic, heavy duty, quality silicone tray mould, not a clone.
Create 8 beautiful soaps in this easy to use silicone mould.
We recommend placing this mould on a cutting board or tray before pouring the soap to help prevent spills in case it needs to be moved before it has set up.
This mould is perfect for 900ml sized batches, and if you are embedding or layering you can just see the levels through the sides in case you need to check embeds (it's not crystal clear though!)
Tip: If making Cold Process soap in this (or any) silicone mould we recommend adding Sodium Lactate Plus to your recipe. This will help to harden up your soap so that there won't be any dents or finger marks from unmoulding the soap. We find that Cold Processed Soap is better left in this type of silicone mould for 48 hours before unmoulding.
Cavities: 1 cavity, to be cut into 8 bars
Total Slab Dimensions: 20cm x 20cm x 3cm
Individual Bar Dimensions: 9.2cm x 4.2cm x 2cm deep
Total Capacity: Approx. 496g total weight, individual bar weight approx. 62g
Material: Flexible Silicone
Easy Clean: Warm, washing up water (we do not recommend using a dishwasher)
Suitable for: Melt and Pour Soap and Cold Processed Soap
Temperature - up to 230°C
Mould Colour: Natural, transluscent
Manufacturer: Aussie Soap Supplies
**Dimensions given are approximate
If using cold process soap, we recommend either a 15% water discount, or adding 1 tsp Sodium Lactate per 500g of soap to your recipe for easier unmoulding.
See this page for usage and care instructions for this mould
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS IT'S SHAPE AND DURABILITY
Tip: If making Cold Process Soap in this (or any) silicone mould we recommend either a 15% water discount, or adding Sodium Lactate Plus ; 1 tsp Sodium Lactate per 500g of soap to your recipe for easier unmoulding. We find that Cold Processed Soap is better left in this type of silicone mould for at least 48 hours before unmoulding.
See this page for usage and care instructions for this mould
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER TO ENSURE MOULD RETAINS IT'S SHAPE AND DURABILITY
| Cavities: | 1 cavity, to be cut into 8 bars |
| Individual Bar Weight: | 110g |
| Temperature: | -10 - 230°C |
| Manufacturer: | Aussie Soap Supplies |
| Mould Material: | Flexible Food-grade Silicone* (FDA standard) |
| Mould Colour: | Natural |
| Individual Bar Dimensions: | 9.2cm x 4.2cm x 2cm deep |
| Overall Capacity: | 900g |
| Overall Mould Dimensions: | Internal: 20cm x 20cm x 2.5cm |
| Suitable For: | Melt and Pour Soap and Cold Processed Soap |
