Flexible Silicone Platinum Mould.
The flexibility of silicone makes unmoulding "the loaf" so much easier! The inside of this mould has a high gloss finish giving your soap will have that smooth, professional finish. The sides are re-inforced externally to help prevent bowing, however, please see Tip 2 below to be sure!
This mould is so versatile as you can see from the graphics, and if layering you can just see the levels through the sides in case you need to check embeds (not crystal clear tho!)
Tip 1: If making Cold Process soap in this (or any) silicone mould we recommend adding Sodium Lactate Plus to your recipe. This will help to harden up your soap so that there won't be any dents or finger marks from unmoulding the soap. We find that Cold Processed Soap is better left in this type of silicone mould for 48 hours before unmoulding.
Tip 2: This mould may bow a little if filled all the way to the brim. In our tests, filling 1 to 1.5cm from the top made unmoulding easier, and also didn't bow the sides. If you really need that extra height and to help prevent any possible bowing, we use two blocks of MP Soap (or you can use house bricks or books wrapped in towels too!) to hold the mould firmly to take that extra bit of height.
Soap weight: 1.4kg
Internal Mould Size: 25.7cm x 9.1cm x 6.2cm
Manufacturer: Aussie Soap Supplies
This silicone soap mould is safe up to 230°C, 440°F
Click HERE to see our entire range of Loaf and Log Moulds in different shapes and sizes!
We use this mould constantly, from our recipe formulary: Wildflower Honey, Calendula and Lanolin Cold Process Soap, Molten Lava Cold Process Soap, Sweethearts Melt and Pour Soap and more!
HAND WASH ONLY, DO NOT WASH IN A DISHWASHER!
See THIS page for usage and care instructions for this mould.
|Individual Bar Weight:
|Cut to preferred size
|Aussie Soap Supplies
|Flexible Food grade Silicone (FDA) Standard)
|Individual Bar Dimensions:
|Internal mould size: 25.5cm x x 8.9cm x 5.7cm
|Melt and Pour Soap, Cold Processed Soap, Hot Process Soap